Efficient Exam D-SNC-DY-00 Book to Obtain EMC Certification

If you try on our D-SNC-DY-00 exam braindumps, you will be very satisfied with its content and design. Trust me, you can't find anything better than our D-SNC-DY-00 study materials. If you think I am exaggerating, you can try it for yourself. We can provide you with a free trial version. If you try another version and feel that our D-SNC-DY-00 practice quiz are not bad, you can apply for another version of the learning materials again and choose the version that suits you best!

EMC D-SNC-DY-00 Exam Syllabus Topics:

Topic	Details
Topic 1	SONiC Bundles: In this topic, your understanding of Enterprise SONiC bundles will be assessed. As a cloud engineer, you must be able to compare different SONiC bundles, demonstrating your expertise in selecting the appropriate bundle for various cloud environments. Mastery of this will ensure you can optimize network configurations effectively.
Topic 2	QoS: Your understanding of Quality of Service (QoS) is essential to become a certified Dell cloud engineer. The exam evaluates your ability to configure and verify QoS features. This section tests your ability to ensure optimal network performance, a vital skill in managing cloud environments where service quality is paramount.
Topic 3	VXLAN: This topic focuses on your ability to manage VXLAN operations, including configuring and verifying BGP EVPN with both Asymmetric and Symmetric IRB. Understanding VXLAN is essential for enabling scalable and efficient cloud networks, making this topic critical to your D-SNC-DY-00 Exam Success.
Topic 4	Routing: Here, your routing knowledge will be tested, particularly in administering L3 IP addressing, configuring static routes, and understanding OSPF and BGP operations. As a cloud engineer, you must be adept at managing routing protocols and configurations to maintain efficient network traffic flow.

>> Exam D-SNC-DY-00 Book <<

100% Pass EMC D-SNC-DY-00 - Dell SONiC Deploy Exam Marvelous Exam Book

Our passing rate is very high to reach 99% and our D-SNC-DY-00 exam torrent also boost high hit rate. Our D-SNC-DY-00 study questions are compiled by authorized experts and approved by professionals with years of experiences. They are compiled according to the latest development conditions in the theory and practice and the questions and answers are based on real exam. Our study materials can improves your confidence for real exam and will help you remember the exam questions and answers that you will take part in. You can choose the version which suits you mostly. Our Dell SONiC Deploy Exam exam torrents simplify the important information and seize the focus to make you master the D-SNC-DY-00 Test Torrent in a short time.

EMC Dell SONiC Deploy Exam Sample Questions (Q25-Q30):

NEW QUESTION # 25
Refer to the exhibit.

The route distinguisher was autogenerated. Which VLAN is mapped to VNI410?

A. VLAN41
B. VLAN 26
C. VLAN 410
D. VLAN 10

Answer: D

Explanation:
The route distinguisher (RD) in the exhibit is 10.0.2.26:41. The RD typically reflects the VNI and VLAN mapping configuration. Given that the VNI is 410 and the RD ends with :41, it implies that VLAN 10 is mapped to VNI 410.
References:
* Dell Technologies SONiC documentation
* VXLAN Configuration Guide

NEW QUESTION # 26
What is a correct use-case scenario for ZTP in Enterprise SONiC?

A. The user wants to configure the switch manually using the CLI.
B. The user wants to replace a failed unit and use an automatic script.
C. The user wants multivendor switch deployment.
D. The user wants single pane of glass monitoring.

Answer: B

Explanation:
ZTP (Zero Touch Provisioning) is used to automate the configuration of switches, especially useful in scenarios where a failed unit needs to be replaced. By using ZTP, the switch can automatically download and apply the necessary configuration scripts upon boot-up, reducing the need for manual intervention and speeding up the deployment process.
References:
* Dell Technologies SONiC documentation
* Zero Touch Provisioning Guide

NEW QUESTION # 27
A customer must configure a peer link between two switches in the L2 MC-LAG scenario.
SwitchB has already been configured. Configure the peer link on SwitchA.
Use the following configuration information:
MC-LAG domain 1
VLAN 101
Peer link Port-Channel 100
SwitchA IP: 192.168.1.1/24
SwitchB IP: 192.168.1.2/24
MC-LAG system MAC: 00:00:00:11:11:11
The physical ports to connect the peer switch are Eth 1/5 and Eth 1/6 for each switch.

Answer:

Explanation:
see the explanation for all step by step solution with all explanation.
Explanation:
Here are the steps to configure the peer link on SwitchA:
* Enter Configuration Mode:
SwitchA# configure terminal
* Create VLAN 101:
SwitchA(config)# vlan 101
* Create Port-Channel 100:
SwitchA(config)# interface port-channel 100
SwitchA(config-if-po100)# switchport mode trunk
SwitchA(config-if-po100)# switchport trunk allowed vlan 101
SwitchA(config-if-po100)# exit
* Assign Physical Interfaces to Port-Channel 100:
SwitchA(config)# interface ethernet 1/5
SwitchA(config-if-eth1/5)# channel-group 100 mode active
SwitchA(config-if-eth1/5)# exit
SwitchA(config)# interface ethernet 1/6
SwitchA(config-if-eth1/6)# channel-group 100 mode active
SwitchA(config-if-eth1/6)# exit
* Configure MC-LAG Domain 1:
SwitchA(config)# mclag domain 1
SwitchA(config-mclag-domain)# peer-link port-channel 100
SwitchA(config-mclag-domain)# local-ip 192.168.1.1
SwitchA(config-mclag-domain)# peer-ip 192.168.1.2
SwitchA(config-mclag-domain)# system-mac 00:00:00:11:11:11
SwitchA(config-mclag-domain)# exit
* Save Configuration:
SwitchA# write memory
Comprehensive Detailed Step by Step Explanation with References:
* Enter Configuration Mode:
* Begin by entering the global configuration mode to make changes to the switch configuration.
* Create VLAN 101:
* Create VLAN 101 to be used for the MC-LAG peer link communication.
* Create Port-Channel 100:
* Enter the port channel interface configuration mode using interface port-channel 100.
* Set the port channel to trunk mode with switchport mode trunk.
* Allow VLAN 101 on the trunk with switchport trunk allowed vlan 101.
* Exit the port channel interface configuration mode.
* Assign Physical Interfaces to Port-Channel 100:
* Enter interface configuration mode for ethernet 1/5 and assign it to port channel 100 using the channel-group 100 mode active command.
* Exit the interface configuration mode.
* Repeat the same steps for ethernet 1/6.
* Configure MC-LAG Domain 1:
* Enter the MC-LAG domain configuration mode using mclag domain 1.
* Specify the peer link port channel with peer-link port-channel 100.
* Configure the local IP address as 192.168.1.1 using local-ip 192.168.1.1.
* Configure the peer IP address as 192.168.1.2 using peer-ip 192.168.1.2.
* Set the MC-LAG system MAC address using system-mac 00:00:00:11:11:11.
* Exit the MC-LAG domain configuration mode.
* Save Configuration:
* Save the configuration to ensure the changes persist after a reboot using the write memory command.
References:
* Dell Technologies Networking - SONiC
* Dell Enterprise SONiC Deployment Guide
These steps provide a comprehensive guide to configure the peer link for an MC-LAG scenario on SwitchA, ensuring the specific requirements for IP addressing, VLAN configuration, and port channel setup are met.

NEW QUESTION # 28
What is the impact of entering the qos-mode uniform command on a VTEP interface?

A. A uniform VNI value is configured on local and remote VTEP interfaces.
B. The payload DSCP value is copied to the outer header DSCP value.
C. The DCSP values for the local and remote VTEPs are synchronized.
D. The local VNI value is aligned to the VNI of the remote VTEP interface.

Answer: B

Explanation:
Entering the qos-mode uniform command on a VTEP interface ensures that the DSCP (Differentiated Services Code Point) value of the payload is copied to the outer header DSCP value. This maintains the Quality of Service (QoS) markings across the VXLAN tunnel, allowing consistent traffic prioritization.
References:
* Dell Technologies SONiC documentation
* VXLAN and QoS Configuration Guide

NEW QUESTION # 29
Refer to the exhibits.

PC1 has a valid address on the 192.168.10.0 network, and PC2 has a valid address on the 192.168.20.0 network.
What happens when a ping command is issued between PC1 and PC2?

A. The ping is unsuccessful because there is no route from switch 1 to the 192.168.20.0 network.
B. The ping is unsuccessful because there is no route to the VLAN 10 gateway address of 192.168.10.254.
C. The ping is successful because there is a route to 10.0.1.1, which is connected to 1(10.2.2, which is connected to PC2.
D. The ping is successful because there are two routes from switch1 to switch2 which are connected to PC2.

Answer: A

Explanation:
* Network Topology Analysis:
* PC1 is on VLAN 10 with an IP address in the 192.168.10.0/24 subnet.
* PC2 is on VLAN 20 with an IP address in the 192.168.20.0/24 subnet.
* The network uses OSPF for routing between the switches.
* The OSPF area is 0, and all switches have loopback interfaces for OSPF.
* Routing Table Examination (from switch1):
* The show ip route command output from switch1 provides a detailed look at the routing table.
* Routes to the 192.168.10.0/24 network (directly connected via Vlan10) are present.
* No routes to the 192.168.20.0/24 network are listed in switch1's routing table.
* Explanation:
* For PC1 to communicate with PC2, switch1 must have a route to the 192.168.20.0/24 network.
* The absence of a route to the 192.168.20.0/24 network in switch1's routing table means that switch1 cannot forward packets destined for 192.168.20.0/24.
* Therefore, any ping from PC1 to PC2 will be unsuccessful as switch1 does not know how to route packets to PC2's network.
* Verification with Dell SONiC:
* In Dell SONiC environments, OSPF is configured to ensure dynamic routing.
* The configuration must include all necessary networks for inter-switch routing.
* If a network (like 192.168.20.0/24) is not included in OSPF configurations on switch1, routes to that network will not be advertised or learned, leading to failed connectivity tests like the ping from PC1 to PC2.
References:
* Dell Enterprise SONiC Deployment Guide
* Dell Technologies Networking - SONiC

NEW QUESTION # 30
......

Free EMC D-SNC-DY-00 exam questions demo download facility, affordable price, 100 percent EMC D-SNC-DY-00 exam passing money back guarantee. All these three EMC D-SNC-DY-00 exam questions features are designed to help you in EMC D-SNC-DY-00 Exam Preparation and enable you to pass the final EMC D-SNC-DY-00 certification exam easily.

Hot D-SNC-DY-00 Spot Questions: https://www.dumpsreview.com/D-SNC-DY-00-exam-dumps-review.html

0

Course Enrolled

0

Course Completed

Ron Young Ron Young

About me

Efficient Exam D-SNC-DY-00 Book to Obtain EMC Certification

EMC D-SNC-DY-00 Exam Syllabus Topics:

100% Pass EMC D-SNC-DY-00 - Dell SONiC Deploy Exam Marvelous Exam Book

EMC Dell SONiC Deploy Exam Sample Questions (Q25-Q30):

0

0

로그인